Perler vs Hama vs Artkal Beads

All three brands sell 5 mm “midi” fuse beads that fit the same 29×29-class square pegboards. They differ in color range, code systems, specialty finishes and—according to many crafters—how soft the piece feels after ironing. BeadSheet supports Perler (103 colors), Hama Midi (92) and Artkal S (199) with separate pattern makers and color charts.

Quick comparison

PerlerHama MidiArtkal S
Bead class in BeadSheet5 mm5 mm5 mm hard S
Colors in our palette10392199
Code styleP01… (plus some C-codes); item nos. 80-xxxxxH01… colour numbersS01… plus SE/SG/SL/SN/SP/ST specialties
Typical marketUS craft storesUK / EuropeWide online; large shade range
Open makerHomeHama makerArtkal maker

Artkal also sells soft R and 2.6 mm mini lines—those English palettes are not what the S maker uses. Hama Mini (~2.5 mm) and Maxi (~10 mm) need their own boards; see fuse bead sizes.

Can you mix them on one board?

Many people mix 5 mm brands on the same pegboard. Layout transfers bead-for-bead; colors do not—H18 and P18 are both “black” labels but most numbers are unrelated. Crafters often report Hama fusing a bit softer/shinier and Artkal S staying rigid; neither Hama nor Perler publishes an official melt temperature. Iron a small mixed test patch first, and keep each brand to whole color areas when possible.

Translating a shopping list: Hama→Perler chart · Artkal→Perler chart.

Which should you buy?

Brand-agnostic entry: fuse bead pattern maker.

Related